Promise-technology FAST TRAK100TM Uživatelský manuál stáhnout pdf (Strana 52)

FastTrak100 User Manual

Offline: Drives that are NOT identified as “bad” may be taken offline if part

of a Striping or Spanning array containing a “bad” drive. These drives do

NOT need to be replaced, however.

S.M.A.R.T. Status: Indicates whether attached hard drive implements Self-

Monitoring Analysis & Reporting Technology to predict drive failure

Size: Indicates capacity of individual drive

Location: Shows physical location of drive. Indicates on which IDE channel (1

or 2), and whether drive is Master or Slave on cable. This allows user to

identify drives for removal/replacement.

Mapping: Indicates physical parameters of drive (cylinders, heads, sectors)

Timing: Shows selection of drive timing (directly related to burst speed) based

on type of drive and cable used.

Using Array Pull-down Menu

At the bottom of the Array window, it indicates to right-click on an Array to perform

synchronization or rebuild operations. Right-clicking displays the following pull-

down menu:

From this menu, users may choose to have the Window Always Appear on Top of

applications, Minimize, Synchronize mirrored drives, Rebuild a mirrored array,

use About to check FastCheck version #, or Exit the onscreen window.

1 2 ... 47 48 49 50 51 52 53 54 55 56 57 ... 98 99

Žádné komentáře

Promise-technology FAST TRAK100TM Uživatelský manuál Strana 52