Promise Technology Network Device EX8658 Uživatelský manuál stáhnout pdf (Strana 4)

SuperTrak EX8654, EX8658 Quick Start Guide

Step 2: Installing the SuperTrak Card

The SuperTrak EX Controller card fits into any available 3.3-volt PCI-Express X8

slot. You can also plug the SuperTrak card into a PCI-Express X16 slot.

1. Remove the cover of your PC or enclosure.

2. Remove the inside slot cover of an available PCI-Express slot on the

motherboard.

3. Install the SuperTrak card into the open PCI-Express slot.

4. Fasten the SuperTrak card bracket to the PC or enclosure case.

5. EX8654 only. Attach one end of a SAS multi-lane cable to the internal SAS

port on the SuperTrak card.

6. Attach one end of a SAS multi-lane cable to an external SAS port on the

SuperTrak card. Attach two cables on EX8658.

See Figures 1 and 2.

Note

The SuperTrak EX Controller cards are PCI Plug-n-Play (PnP)

devices. No changes are necessary in the motherboard CMOS/

BIOS Setup for resources or drive types in most applications.

1 2 3 4 5 6 7 8 9 ... 153 154

Žádné komentáře

Promise Technology Network Device EX8658 Uživatelský manuál Strana 4