Promise Technology VTrack M-Class M500p Manuál stáhnout pdf (Strana 13)

Step 6: Connect the Power

Figure 15.VTrak M300f/i and M200f/i front panel LED display

When boot-up is finished and the VTrak is functioning normally:

• Controller LED blinks green once per second for five seconds, goes dark for

ten seconds, then blinks green once per second for five seconds again.

• Power, FRU and Logical Drive LEDs display green continuously.

• Fibre Channel/iSCSI/SCSI LEDs flash green if there is activity on that

channel.

There are two LEDs on each Drive Carrier. They report the presence of power

and a disk drive, and the current condition of the drive.

Figure 16.VTrak M500f/i/p disk carrier LEDs

Power

FC/iSCSI/SCSI-2 Activity

FRU Status

Logical Drive Status

FC/iSCSI/SCSI-1 Activity

Controller Heartbeat

Disk Status

Power/

Activity

1 2 ... 8 9 10 11 12 13 14 15 16 17 18 ... 41 42

Žádné komentáře

Promise Technology VTrack M-Class M500p Manuál Strana 13