Promise Technology VTrack M-Class M500p Manuál stáhnout pdf (Strana 104)

VTrak M-Class Product Manual

4. Click on the Channel 1 or the Channel 2 link.

The settings screen displays a list of the 16 Targets and Termination for the

selected SCSI channel.

To enable a SCSI target:

1. Check (click on) the TID box beside the target you want to enable.

Checked means enabled, unchecked means disabled.

2. Click the Submit button.

To set Termination for the VTrak SCSI controller “Out” connectors:

1. From the Termination dropdown menu, select Automatic, ON or OFF.

Automatic means the termination function will set itself automatically.

2. Click the Submit button.

SCSI Target Information

1. Click the Subsystem icon in Tree View.

2. Click the Administrative Tools icon.

3. Click on the SCSI Management icon.

The Channel tab displays SCSI Channel Information:

4. Click on the Target tab.

The Target tab displays information about the 16 SCSI targets on each of the

two SCSI channels:

• Status – Enabled or Disabled

• Negotiated Transfer Rate – Data Transfer Rate in MB/s

• Bus Width – Narrow or Wide

A value of N/A under Transfer Rate or Bus Width appears when the Target is

disabled. To enable a SCSI Target, see “SCSI Channel Settings” on page 95.

Note

You must restart the VTrak for new settings to become effective.

See “Shutdown and Restart” on page 109.

Cautions

• Turn off termination only when the VTrak is NOT the last

device in the SCSI chain.

• Internal termination only works on the “Out” SCSI connectors.

1 2 ... 99 100 101 102 103 104 105 106 107 108 109 ... 315 316

Žádné komentáře

Promise Technology VTrack M-Class M500p Manuál Strana 104