Promise Technology VTrack M-Class M500p Manuál stáhnout pdf (Strana 117)

Chapter 4: Management with WebPAM PROe

109

1. Click the Subsystem icon in Tree View.

2. Click the Administrative Tools icon.

3. Click on the Clear Statistics link.

The Clear Statistics tab appears in Management View.

4. Click on the Submit button.

5. In the confirmation box, type the word confirm in the field provided.

6. Click the OK button.

Shutdown and Restart

The Shutdown and Restart function enables you to:

• Shut down the subsystem

• Shut down and restart the subsystem

You can only do part of this function in WebPAM PROe. Additional action is

required, as described below. If you want to monitor the shutdown or restart

process, see the notes below.

Shutdown

To shutdown the subsystem:

1. Click on the Subsystem icon in Tree View.

2. Click on the Administrative Tools icon.

3. Click on the Shutdown link in Management View.

A Shutdown or Restart tab will appear.

4. On the Shutdown or Restart tab, select Shutdown from the dropdown menu.

5. Click the Submit button.

6. In the confirmation box, type the word confirm in the field provided.

7. Click the OK button.

When the controller shuts down, your WebPAM PROe connection will be

lost.

8. Wait for no less than two minutes.

9. Manually turn off the power supply switches on the back of the subsystem.

Monitor the Shutdown

To monitor a shutdown, you must use the Command Line Interface (CLI) though

a serial connection to the VTrak.

At the “administrator@CLI>” prompt, type shutdown -a shutdown.

1 2 ... 112 113 114 115 116 117 118 119 120 121 122 ... 315 316

Žádné komentáře

Promise Technology VTrack M-Class M500p Manuál Strana 117